Shop

RV Parts:Home/Shop
  • Replacement flush ball seal/flush ball gasket for Dometic RV Toilets To suit Dometic 300, Dometic 310 & Dometic 320 model RV Toilets (now discontinued) Dimesions:  Outer Diameter 4"; Inner Diameter 2.75" Colour:  Black    
  • Discontinued Model!  Only 2 left in stock.  Once they're gone, they're gone!

    _________________________________________________________________________________________________________________

    Dometic Sink Drainer with Flush Glass Lid

    Rinsing, washing, disposing of waste - these simple tasks can be a drag when you're on the move.  The solution is simple - why not install a sink in your RV? The Dometic Sink Drainer with Flush Glass Lid is a practical solution to complement your mobile kitchen fittings.  Constructed from hard-wearing material, this sink and drainer is built to last.  It features a practical glass lid which is simply folded down after washing up, providing additional work space.  How convenient!
    Dimensions:  600W x 445D (mm)
    Features:
    • Elegant design
    • Heat-resistant safety glass lid
    • Siphon
    • Rubber seal
    • Integrated waste tray
    • Includes hole for tap
    • Weight: 5.1kg
    • Dimensions (W x H x D): 600 x 136 x 445mm
    • Built-in dimensions (W x D): 590 x 435mm
    Also available to purchase - fold down tap to suit.  Please CLICK HERE
  • Dometic 300 series (300, 310, 320) Toilet water valve kit.

    Genuine part. Complete with clamp, screws & instructions.
  • 'Elecbrakes' 12 pin Adapter for Electric Braking System
    • 1 x Flat 12 pin male/12 pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 12 pin Male/12 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • ‘Elecbrakes’ 7-12 Pin Adapter

    $119.00 Part no: DRV0195
    'Elecbrakes' 7 pin Adapter for Electric Braking System
    • 1 x Flat 7 pin male/12 Flat pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 7 pin Male/12 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' 7 pin Adapter for Electric Braking System
    • 1 x Flat 7 pin male/7 pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 7 pin Male/7 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' Electric Brake Controller for trailers, horse floats, caravans & boats. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake controller. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify!
  • 'Elecbrakes' Electric Brake Controller for trailers, horse floats, caravans & boats. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake controller. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify! __________________________________________________________________________________________________________________________

    BEFORE COMPLETING YOUR PURCHASE - Please note:  

    As a minimum, you will require 1 x Elecbrakes Controller and EITHER the Hardwired Trailer Leader OR an Adapter Plug (not both!!!). IF you are fitting the Elecbrakes system to an existing trailer that already has electric brakes fitted, you will require an Adapter Plug (not the hard wired trailer leader!).  IF you are fitting the Elecbrakes System to a NEW trailer, it is best to install the Hard Wired Trailer Leader (no need for an Adapter Plug!!). The Remote Control is optional (the entire system is designed to be run off an app on your smart phone!). This means that ANYONE in ANY vehicle can tow your trailer with the Elecbrakes system fitted so long as someone in the vehicle has the Elecbrakes App on their phone and it is paired to the controller on your trailer.  Too easy!
  • 'Elecbrakes' Hard Wired Trailer Leader for Electric Braking System
    • 1 x 1.5mtr leader pre-wired with matching Deutsch plug, allows leader to be internally routed through trailer chassis as required.
    NB:  This adapter is to be used when you are installing an Elecbrakes System from scratch on a new trailer or one that didn't previously have electric brakes.  IF you are replacing an existing Electric Braking system with the 'Elecbrakes' System, you will need the 'Elecbrakes' 7 Pin Adapter Plug   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' Wireless Remote Control for Electric Braking System Elecbrakes in car remote control allows the user to control braking response, select user defined programs and activate trailer brakes only by using the manual override button. Included in the kit:
    • Remote Control
    • 12v/24v USB Charger
    • USB Cable
    For the Elecbrakes Controller CLICK HERE. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake control system. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify!
  • 'Fiamma' Table Pole - Full Set or Individual Parts Set Includes:

    • 1 x Pole Tube - Height 700mm complete with 2 plastic joint caps (this can be cut down if needed)
    • 1 x Recessed Base
    • 1 x Conic top mount connection
    • All necessary mounting screws
    • Does NOT include the Recessed Base Plug.  This must be purchased separately.
    OR parts are available for purchase separately.  Please select the part/s you require from the drop down menu.    
  • ‘Jensen’ 14 x 14″ Roof Vent

    $149.00 Part no: DRV0273

    Jensen Roof Hatch 14" x 14"

    Features:
    • Self-centering device eliminates installation guess work and assures perfect alignment in roof opening
    • Standard radius corners
    • Screen allows air through while keeping insects out
    • Simple to install or replace any vent with a roof opening of 14" x 14"
    • Metal base with white UV resistant acrylic lid
    • Accommodates a variety of roof thicknesses
    • Suitable for roof thicknesses 25-70mm
  • 'Johnny Chock' Tank Flush Assist

    Johnny chock is patented method for flushing out your black water tank. Johnny Chock allows for the continuous flow of water to your holding tank.  When Johnny Chock is in place there is no need to hold or wedge toilet flush valve with your foot, hands or a stick.  To use, simply open flush valve with hand or foot and place Johnny Chock in toilet bowl where it will keep valve open until you remove it.
    • Inside Dimension:  2 inches
    • Outside Dimension:  2 3/8 inches.
  • We have a range of replacement parts available for Lippert Slide Outs.  If you are looking for something in particular please call Steve on 027 236 4272.

      The Lippert Range Lippert Components are the largest supplier of Slide Out Systems to the US RV Market.  Started in 1957, their longevity in the RV industry stands as a testament to the quality workmanship that goes into each kit. Slide Out Systems provide more living space to RV consumers without compromising overall size.
  • Low profile Maxxfan ventilation unit features closed-lid running capabilites, an easy to clean removable fly screen, an impressive 10 speed 12v fan motor, with manual opening.
    • Removable flyscreen – simply twist the L-clamps and remove for cleaning!
    • Installs onto all standard 14” x 14” (356mm x 356mm) roof openings
    • Powerful 10-speed fan motor
    • Fan can run even if the lid is closed (select ‘Ceiling Fan Mode’) and can be used in “intake” and “exhaust” modes
    • Provides over 900CFM, keeping your RV cool and comfortable
    • Twin lifting arms limit vibrations cause by wind when in the ‘open’ position
  • The "Maxxfan Ventilation System" is the only complete RV/Horse Float or Coach ventilation system that incorporates a vent, a fan, a remote control and rain protection all in a single unit that is robust! 
    • Been Used in the USA RV Market since 1988
  • 'MaxxAir' Standard Vent Cover (white)

    Leave your vent open rain or shine. The Maxxair vent cover offers high-flow ventilation in an aerodynamic design. Removeable louvres for easy cleaning.  Mounts to existing 14"x14" roof vents.  UV stabilized resin for years of rugged use.
  • RV ventilation has never been easier than with a MaxxFan. They’ve been used in the US RV market since 1988, and they are now exclusively available from Coast to Coast. The MaxxFan Plus is available in a manual option and an electric opening option (with remote control), and they also have a ceiling mounted control panel that is easy to use and read. Note:  This vent is the MANUAL LIFT version.  For the Power Lift Version, please CLICK HERE.
  • OUT OF STOCK - ETA Mid August '23.

    ________________________________________________________________________________________________________________________

    'Maxxfan' Plus - Vent with Thermostat, Power Lift, Rain Sensor & Remote

    RV ventilation has never been easier than with a MaxxFan.  They’ve been used in the US RV market since 1988, and they are now exclusively available from Coast to Coast.  The MaxxFan Plus and the MaxxFan Deluxe, both have a manual option and an electric opening option, and they also have a ceiling mounted control panel that is easy to use and read. These vents fit all standard 14" x 14" roof openings.
  • RecPro Magnetic Baggage/Locker/Compartment Door Catch

    Keeps storage compartment doors open for loading and unloading. Colour:  Black Price is for a SINGLE set (2pcs)  
  • 'Sphere' W.A.S 1 Gang Wireless Light Switch

    Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features:
    • Comes with 2 x CR2032 lithium batteries
    • Easy installation - no drilling
    • No wires, saving on wire costs
    • Long lasting battery operation
    • Surface mounting
    Specifications: Switch backing is 120mm x 80mm Single light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation - no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Two light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation – no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Single light switch with master off Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • 'Sphere' W.A.S 3 Gang Wireless Light Switch

    Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation – no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Three light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.

Title

Go to Top