-
Atwood 91858 - Replacement Door Hardware Kit for Water Heater Exterior Access Hatch We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 92078 – RV Water Heater Gas Control Valve
This is an electrically operated valve which opens to allow propane to flow into the burner chamber. It is controlled by the water heater circuit board (not included). Fits Atwood Models: G6A-2E, G6A-3E, G6A-4E, G6A-6E, G6A-7E, G6A-8E, G610-3E, GC6A-7E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GC6AA-10E, GCH6-4E, GCH6-6E, GCH6-7E, GCH6A-7E, GCH6A-8E, GCH6A-9E, GCH6A-10E, GH6-3E, GH6-4E, GH6-6E, GH6-7E, GH6-8E, GH610-3E, G9-EXT (G9EXT), GE9-EXT (GE9EXT), GEH9-EXT (GEH9EXT) We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us. -
Atwood 91367 – Water Heater Circuit Board Kit with fuse is to be used with a gas only direct spark ignition water heater. Mounting screws included. Also comes with Atwood 92075 – Edge/Pin Adaptor. We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 91365 - is a potted circuit board combo with fuse for Atwood water heaters. We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 91386 - Water Heater Access Door for 6 gallon Water Heaters
Atwood/Dometic Exterior Access DoorColour: Arctic WhiteMaterial: SteelDimensions: 18"W x 14"H x 1/4" thickWe stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us. -
Atwood 93105 - Water Temperature Adjuster
- Control the water temperature of your Atwood Electronic Ignition Water Heater.
- Adjusts from 110° to 150°.
- All you need is a flat bladed screw driver.
- Thermostat fits all Atwood Front Mount E.C.O. and T-Stat Gas Direct Ignition Water Heaters.
-
'Atwood' - Water Heater Element (92251)
- 220v
- 1000w
- Heating Element (screw-in type) to suit 6 Gallon 220v Atwood RV Water Heaters.
-
Atwood 91604 - Water Heater Pressure Relief Valve - 150 PSI - 1/2" NPT Thread We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 93868 – Water Heater Spark Probe/Igniter We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Sale!Atwood 93866 – Water Heater Thermal Cut Off Fuse (single) We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 91447 - Water Heater Thermostat Assembly We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Extend the life of your RV's water heater with Camco's patented magnesium anode rod for aluminum water heaters (Atwood style). We stock the largest range of Atwood Water Heater parts in New Zealand! If you are looking for something in particular that is not listed please Contact Us.
-
Atwood 91230 - Water Heater Dual Switch Panel
- Dual Panel DSI Water Heater Switch
- 12VDC
- White
-
Atwood to Suburban Water Heater Surround/Conversion Plate
This aluminum surround has been designed and manufactured by us to bridge the gap when removing your old Atwood Water Heater and replacing it with the Suburban Equivalent. Dimensions (in mm)- 420W x 460H
- 325W x 325H
- 2.5mm thick
-
Dometic/Atwood Wall Thermostat
The Dometic Thermostat is a single-stage wall thermostat designed for temperature control of your furnace inside your RV. Designed for 2-wire heating applications only. Atwood Part # 38453 For 12v DC, 24v AC, GAS and/or Oil Heaters Specifications:- Senses room temperature and automatically opens and closes circuits that send 12V DC to your furnace.
- Mounts to the wall with (2) screws.
- Temperature Range: 50-90-degrees F.
- Mechanical readout.
- It does not include fan control.
- Color: White.
- Dimensions: 3-1/8" x 3-1/8" 1-1/2" depth.
- Weight: 0.2 lbs.
- Limited 2-Year Manufacturer Warranty.
